BRP 2995 Johnson - Carburetor Service; Removal

CARBURETOR SERVICE
Removal
Remove the STBD side cover. Refer to side cover
Removal and Installation on p. 180.
Remove two screws securing carburetor.
004650
Remove the silencer case, carburetor, and insula-
tor.
1. Silencer case
004651
2. Carburetor
3. Insulator
FUEL SYSTEM
CARBURETOR SERVICE
Remove fuel hose from carburetor inlet.
Remove throttle rod from carburetor.
1. Fuel hose
004652
2. Throttle rod
Tiller models:
starter cable with starter plunger.
•
Unscrew the starter cable lock nut, then remove I
1. Starter cable lock nut
004653
2. Starter plunger
Remote models:
•
Disconnect the auto-enrichener lead wire con-
nector.
1. Auto-enrichener
004654
113
E
o
U
Qj
)(
~
Qj
~
ii
E