CAPINTEC, INC. CAPRAC
®
-t
9-6 TESTS April 2021
Note: After an Auto Calibration, the Background is invalidated and must be re-measured.
Figure 9-4 Auto Calibrate with Eu152 Results Screen
At this point, the following options are available for continuing:
1. Discard the calibration results – Touch the CANCEL button. Figure 9-1 Main Screen
will re-appear.
2. Save the calibration results – Touch the ACCEPT button. Figure 9-1 Main Screen will
re-appear.
3. Repeat the Cs137 calibration procedure.
4. Repeat the Linearity Correction with Eu152 procedure.
Note: After an Auto Calibration, the Background is invalidated and must be re-measured.
To Next Page
Loading...