Ceragon FA4800 - Page 18

FA4800 User Manual Release 1.9.40 xvii
F
IGURE 12-11 PRIMARY LINK OPERATING AFTER THE SWITCH BACK FROM SECONDARY.....12-13
F
IGURE 12-12 SECONDARY LINK OPERATING AFTER THE SWITCH BACK TO PRIMARY........12-14
F
IGURE 13-1 RING PROTECTION MECHANISM ..........................................................13-2
F
IGURE 13-2 NODE WITH IDU AND POE DEVICE .....................................................13-6
F
IGURE 13-3 1+1 ETHERNET..............................................................................13-7
F
IGURE 13-4 USING IDU-C OR IDU-E WITH POES FOR THE RPL................................13-7
F
IGURE 13-5 SERVICES WINDOW WITH RING SELECTED .............................................13-8
F
IGURE 13-6 RING OPTIONS...............................................................................13-8
F
IGURE 13-7 CONFIGURING RING LAN VIDS..........................................................13-9
F
IGURE 13-8 CONFIGURING RPL VIDS..................................................................13-9
F
IGURE 14-1 TWO NETWORK USING THE SAME LINK WITH TAGGING..............................14-1
F
IGURE 14-2 SEPARATING CLIENT DATA STREAMS USING DOUBLE TAGGING .....................14-2
F
IGURE 14-3 VLAN TAG SETTINGS .......................................................................14-7
F
IGURE 14-4 VLAN: INGRESS MODES ...................................................................14-7
F
IGURE 14-5 VLAN: INGRESS MODE - SETTING VLAN ID AND PRIORITY.......................14-8
F
IGURE 14-6 VLAN: EGRESS MODES.....................................................................14-8
F
IGURE 14-7 UNTAGGING SELECTED VIDS..............................................................14-8
F
IGURE 14-8 PROVIDER PARAMETERS ....................................................................14-8
F
IGURE 15-1 SOFTWARE UPGRADE UTILITY - MAIN WINDOW......................................15-2
F
IGURE 15-2 ADD SITE OPTIONS..........................................................................15-2
F
IGURE 15-3 ADDING A SINGLE SITE FOR UPGRADE ..................................................15-2
F
IGURE 15-4 SINGLE SITE ADDED FOR UPGRADE ......................................................15-3
F
IGURE 15-5 SOFTWARE UPGRADE SITE OPTIONS.....................................................15-3
F
IGURE 15-6 SOFTWARE UPGRADE IN PROGRESS - NOTE THE STOP BUTTON ...................15-4
F
IGURE 15-7 SOFTWARE UPGRADE COMPLETED SUCCESSFULLY.....................................15-4
F
IGURE 16-1 ACTIVATING AN ODU - INACTIVE LINK.................................................16-2
F
IGURE 16-2 AIR INTERFACE DIALOG BOX ..............................................................16-2
F
IGURE 16-3 THE LOCAL ODU AFTER ACTIVATION - PROBING.....................................16-3
F
IGURE 16-4 BOTH SITES ACTIVATED AND AWAITING CONFIGURATION...........................16-4
F
IGURE 16-5 CHANNEL SELECT DIALOG BOX - ACS PERMANENTLY ENABLED....................16-5
F
IGURE 16-6 FCC/IC 5.4/5.3 GHZ OPERATIONAL ...................................................16-6
F
IGURE 17-4 MOUNTING ON A POLE .....................................................................17-2
F
IGURE 17-5 MOUNTING ON A WALL ....................................................................17-3
F
IGURE 17-6 MOUNTED ODUS WITH CORRECT “WATER NOSE”....................................17-4
F
IGURE 17-7 INCORRECTLY MOUNTED ODU (NO “WATER NOSE”)................................17-4
F
IGURE 18-1 GROUNDING ANTENNA CABLES............................................................18-2
F
IGURE 18-2 GROUNDING A TYPICAL POLE INSTALLATION...........................................18-4
F
IGURE 18-3 GROUNDING A TYPICAL WALL INSTALLATION ..........................................18-5
F
IGURE 18-4 ODU SURGE SUPPRESSOR AND GROUNDING ..........................................18-5
F
IGURE 18-5 TRANSTECTOR’S SURGE SUPPRESSOR ...................................................18-6
F
IGURE 18-6 SURGE SUPPRESSOR AND GROUNDING AT BUILDING ENTRY POINT ...............18-7
F
IGURE 19-1 LOG ON WINDOW FOR LOCAL CONNECTION...........................................19-2
F
IGURE 19-2 OPENING FIBEAIR2000 MANAGER WINDOW PRIOR TO INSTALLATION ..........19-3
F
IGURE 19-3 CONFIGURATION DIALOG BOX............................................................19-3
F
IGURE 19-4 MANAGEMENT ADDRESSES - SITE CONFIGURATION DIALOG BOX .................19-4
F
IGURE 19-5 ODU WITH IP ADDRESSING CONFIGURED .............................................19-4
F
IGURE 19-6 CONFIRMATION OF IP ADDRESS CHANGE ..............................................19-4
F
IGURE 19-7 MAIN WINDOW AFTER IP ADDRESS CHANGE..........................................19-5
F
IGURE 19-8 EXISTING IP ADDRESS DISPLAYED AFTER LOG-ON WITH LOCAL CONNECTION .19-6
F
IGURE 20-1 BECOMING INSTALLER ......................................................................20-2
F
IGURE 20-2 OPENING FIBEAIR2000 MANAGER WINDOW PRIOR TO BAND CHANGE (DEFAULT CIRCLED)
20-3
F
IGURE 20-3 CHANGE BAND DIALOG .....................................................................20-3
F
IGURE 20-4 A DIFFERENT BAND SELECTED.............................................................20-4