Cisco AIR-ANT2544V4M-R Guide

146
Cisco Aironet 8-dBi Omni-Directional Antenna (AIR-ANT2480V-N)
The attenuation can be in the form of an attenuator, coax cable loss, or both. This attenuation is required for the system to meet
the regulatory requirements of the indicated country. Failure to install the minimum amount of attenuation shown results in
non-compliant operation. Table 2 on page 146 shows the required attenuation in dB.
Note: X indicates that the antenna is not authorized for use in that country.
Table 2 Required Attenuation in dB
2.4 GHz Antennas (802.11 B /G) 5 GHz Antennas (802.11 A)
AIR-ANT2480
V-N
2.4 GHZ
8 dBi Omni
AIR-ANT2410
Y-R
2.4 GHZ
10 dBi Yagi
AIR-ANT2414
S-R
2.4 GHZ
14 dBi Sector
AIR-ANT58G1
0SSA-N
5 GHz
9.5 dBi Sector
AIR-ANT5114
P-N
4.9–5.8 GHz
14 dBi Patch
AIR-ANT5117
S-N
4.9–5.8 GHz
17 dBi Sector
Asia
Australia None None None None –1 –4
China None None None None –1 –4
Hong Kong None None None None –1 –4
India None None None X X X
JapanNoneXXXXX
KoreaXXXXXX
New Zealand None None None None –1 –4
Singapore None –1 –5 None –1 –4
TaiwanNoneXXNoneXX
Thailand None –1 –5 X X X
EU
BelgiumNone–1–5None–2–5
DenmarkNone–1–5None–2–5
FinlandNone–1–5None–2–5
France None –1 –5 None –2 –5
GermanyNone–1–5None–2–5
Italy None–1–5None–2–5
Netherlands None –1 –5 None –2 –5
Norway None –1 –5 None –2 –5
Spain None –1 –5 None –2 –5
Sweden None –1 –5 None –2 –5
SwitzerlandNone–1–5None–2–5
United KingdomNone–1–5None–2–5
North America
United States None X X None None None
Canada None X X None None None
Mexico None None None None –1 –4
South America
Brazil None None None None –1 –4

Cisco AIR-ANT2544V4M-R Specifications

General

Brand	Cisco
Model	AIR-ANT2544V4M-R
Category	Antenna
Language	English