Cisco ASR 9000 Series User Manual

The router commands listed in Table 9: Commands for Copying Package Files to the Router, on page 37
show how to copy package files to the router using three types of file transfer protocols.
Table 9: Commands for Copying Package Files to the Router
Command and ExamplesServer Type
The following command syntax is used:
copy tftp:// hostname_or_ipaddress / directory-path
/ pie-name disk1:
Example:
RP/0/RSP0/CPU0:router# copy
tftp://10.1.1.1/images/comp-
asr9k-mini.pie disk1:
TFTP
The following command syntax is used:
copy ftp:// username : password @
hostname_or_ipaddress / directory-path / pie-name
disk1:
Example:
RP/0/RSP0/CPU0:router# copy
ftp://john:secret@10.1.1.1/images/
comp-asr9k-mini.pie disk1:
FTP
The following command syntax is used:
copy rcp:// username @ hostname_or_ipaddress /
directory-path / pie-name disk1:
Example:
RP/0/RSP0/CPU0:router# copy
rcp://john@10.1.1.1/images/
comp-asr9k-mini.pie disk1:
rcp
Table 10: Command Variables for Copying and Adding Packages from a Network Server, on page 37
describes the command variables for copying packages from a network server.
Table 10: Command Variables for Copying and Adding Packages from a Network Server
DescriptionVariable
Host name or IP address of the server that stores the
source file.
hostname_or_ipaddress
Name of the PIE file (package). See the Overview of
Cisco IOS XR Software Packages, on page 20 for
descriptions of the available packages.
pie-name
Required for FTP and rcp only and must be a valid
username on the FTP or rcp server.
username
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
37
Upgrading and Managing Cisco IOS XR Software
Obtaining and Placing Cisco IOS XR Software

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English