D-Link DWL-3600AP User Manual

WebServerSettings
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page100
UnifiedAccessPointAdministrator’sGuide
MaximumSessions WhenauserlogsontotheAPwebinterface,asessioniscreated.Thissessionis
maintaineduntiltheuserlogsofforthesessioninactivitytimerexpires.
Enterthenumberwebsessions,includingbothHTTPandHTTPs,thatcanexistatthe
sametime.Therangeis1
–10sessions.Ifthemaximumnumberofsessionsisreached,
thenextuserwhoattemptstologontotheAPwebinterfacereceivesanerrormessage
aboutthesessionlimit.
SessionTimeout Enterthemaximumamountoftime,inminutes,aninactiveuserremainsloggedonto
theAP
webinterface.Whentheconfiguredtimeoutisreached,theuserisautomatically
loggedofftheAP.Therangeis1–14 40minutes(1440minutes=1day).
GenerateSSL
Certificate
SelectthisoptiontogenerateanewSSLcertificateforthesecureWebserver.Thisshould
bedoneoncetheaccess
pointhasanIPaddresstoensurethatthecommonnamefor
thecertificatematchestheIPaddressoftheUAP.GeneratinganewSSLcertificatewill
restartthesecureWebserver.Thesecureconnectionwillnotworkuntilthenew
certificateisacceptedonthebrowser.
HTTPSSLCertificate
File
Status
Indicates whetheracertificatefileispresentandspecifiesitsexpirationdateandissuer
commonname.
ToGettheCurrent
HTTPSSLCertificate
SaveacopyofthecurrentHTTPSSLcertificateonalocalsystemorTFTPserver.
•HTTP—ClickDownloadandspecifywheretostorethebackupcopy
ofthecertificate
file.
•TFTP—Provideafilenameforthecertificatefile,includingthefilepath,specifythe
IPaddressoftheTFTPserverwherethecertificatefi lecopyistobestored,andthen
clickDownload.
TouploadaHTTP
SSLCertificatefrom
aPCora
TFTP
Server
UploadacertificatefiletotheAPbyusingHTTPorTFTP:
•HTTP—BrowsetothelocationwherethecertificatefileisstoredandclickUpload.
•TFTP—SpecifytheIPaddressoftheTFTPserverwherethecertificatefileislocated
andprovidethefilename,including
thefilepath,thenclickUpload.
Note:ClickApplytoapplythechangesandtosavethesettings.Ifyoudisabletheprotocolyouare
currentlyusingtoaccesstheAPmanagementinterface,thecurrentconnectionwillendandyouwill
notbeabletoaccesstheAPbyusingthatprotocoluntilitisenabled.
Table
37:WebServerSettings(Cont.)
Field Description

D-Link DWL-3600AP Specifications

General

Frequency band	2.4 GHz
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	300 Mbit/s
Quality of Service (QoS) support	Yes
Data transfer rate	1 Gbit/s
Wireless technology	802.11 b/g/n
Antennas quantity	2
Antenna gain level (max)	4.7 dBi
Internal	No
Certification	FCC, CE
LED indicators	LAN, Power, WLAN
Interface	RJ-45
WAN connection	Ethernet (RJ-45)
Security algorithms	128-bit WEP, 64-bit WEP, SSID, WPA, WPA2
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Power supply	8 W
Input current	2.5 A
AC input voltage	5 V

Weight and Dimensions

Weight	635 g
Dimensions (WxDxH)	203 x 203 x 48 mm