D-Link DWL-3600AP User Manual

ManagingAccessPointsintheCluster
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page152
UnifiedAccessPointAdministrator’sGuide
AddinganAccessPointtoaCluster
Toaddanaccesspointthatiscurrentlyinstandalonemodebackintoacluster,dothefollowing.
1. GototheAdministrationWebpagesforthestandaloneaccesspoint.
2. ClicktheCluster>AccessPointslinkintheAdministrationpagesforthestand‐aloneaccesspoint.
TheAccessPoints pagefor
astandaloneaccesspointindicatesthatthecurrentmodeisstandalone.
3. TypethenameorlocationoftheAPintheLocationfieldtoidentifytheAPwithinthecluster.
4. TypethenameoftheclusterfortheAPtojoinintheClusterNamefield.
5. ClickStartClustering.
Theaccess
pointisnowaclustermember.ItsStatus(Mode)ontheCluster>AccessPointspagenow
indicatesClusterinsteadofNotClustered.
NavigatingtoConfigurationInformationforaSpecificAP
Ingeneral,theUAPisdesignedforcentralmanagementofclusteredaccesspoints.Foraccesspointsinacluster,
allaccesspointsintheclusterreflectthesameconfiguration.Inthiscase,itdoesnotmatterwhichaccesspoint
youactuallyconnecttoforadministration.
Theremaybesituations,however,when
youwanttoviewormanageinformationonaparticularaccesspoint.
Forexample,youmightwanttocheckstatusinformationsuchasclientassociationsoreventsforanaccess
point.Inthiscase,youcannavigatetotheAdministrationWebinterfaceforindividual accesspointsbyclicking
theIPaddress
linksontheAccessPointspage.
AllclusteredaccesspointsareshownontheCluster>AccessPointspage.Tonavigatetoclusteredaccess
points,youcansimplyclick ontheIP addressforaspecificclustermembershowninthelist.
NavigatingtoanAPbyUsingitsIPAddressinaURL
YoucanalsolinktotheAdministrationWebpagesofaspecificaccesspoint,byenteringtheIPaddressforthat
accesspointasaURLdirectlyintoaWebbrowseraddressbarinthefollowingform:
http://IPAddressOfAccessPoint
whereIPAddressOfAccessPointistheaddressoftheparticularaccesspointyouwanttomonitororconfigure.

D-Link DWL-3600AP Specifications

General

Frequency band	2.4 GHz
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	300 Mbit/s
Quality of Service (QoS) support	Yes
Data transfer rate	1 Gbit/s
Wireless technology	802.11 b/g/n
Antennas quantity	2
Antenna gain level (max)	4.7 dBi
Internal	No
Certification	FCC, CE
LED indicators	LAN, Power, WLAN
Interface	RJ-45
WAN connection	Ethernet (RJ-45)
Security algorithms	128-bit WEP, 64-bit WEP, SSID, WPA, WPA2
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Power supply	8 W
Input current	2.5 A
AC input voltage	5 V

Weight and Dimensions

Weight	635 g
Dimensions (WxDxH)	203 x 203 x 48 mm