D-Link DWL-3600AP - Configuring Email Alert

ConfiguringEmailAlert
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page106
UnifiedAccessPointAdministrator’sGuide
ConfiguringEmailAlert
TheEmailAlertfeatureallowstheAPtoautomaticallysendemailmessageswhenaneventatorabovethe
configuredseverityleveloccurs.UsetheEmai lAlertConfigurationpagetoconfiguremailserversettings,toset
theseveritylevelthattriggersalerts,andtoadduptothreeemailaddresseswhere
urgentandnon‐urgent
emailalertsaresent.
Figure32:ConfiguringEmailAlert
Note:EmailalertisoperationallydisabledwhentheAPtransitionstomanagedmode.
Table41:EmailAlertConfiguration
Field Description
EmailAlertGlobalConfiguration
AdminMode GloballyenableordisabletheEmailAlertfeatureontheAP.Bydefault,emailalerts
aredisabled.
FromAddress SpecifytheemailaddressthatappearsintheFromfieldofalertmessagessentfrom
theAP,forexampledlinkAP23@foo.com.Theaddresscanbeamaximumof
255
charactersandcancontainonlyprintablecharacters.Bydefault,noaddressis
configured.
LogDuration Thisduration,inminutes,determineshowfrequentlythenoncriticalmessagesare
senttotheSMTPServer.Therangeis30‐1440minutes.Thedefaultis30minutes.