D-Link DWL-3600AP - Table 43: Snmpv3 Views

ConfiguringSNMPv3Views
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page112
UnifiedAccessPointAdministrator’sGuide
Table43describesthefieldsyoucanconfigureontheSNMPv3Viewspage.
Table43:SNMPv3Views
Field Description
ViewName EnteranametoidentifytheMIBview.
Viewnamescancontainupto32alphanumericcharacters.
Type Specifieswhethertoincludeorexcludetheviewsubtreeorfamilyofsubtreesfromthe
MIBview.
OID EnteranOIDstringforthesubtreetoincludeorexcludefromtheview.
For
example,thesystemsubtreeisspecifiedbytheOIDstring.1.3.6.1.2.1.1.
Mask TheOIDmaskis47charactersinlength.TheformatoftheOIDmaskisxx.xx.xx(.)...or
xx:xx:xx....(:)andis16octetsinlength.Eachoctetis2 hexade cimalcharactersseparated
byeither.(period)or:
(colon).Onlyhexcharactersareacceptedinthisfield.For
example,OIDmaskFA.80is11111010.10000000.
Afamilymaskisusedtodefineafamilyofviewsubtrees.Thefamilymaskindicateswhich
sub‐identifiersoftheassociatedfamilyOIDstringaresignificanttothefamily's
definition.
Afamilyofview
subtreesallowscontrolaccesstoonerowinatable,inamoreefficient
manner.
SNMPv3Views ThisfieldshowstheMIBviewsontheUAP.Toremoveaview,selectitandclickRemove.
Note:AfteryouconfiguretheSNMPv3Viewssettings,youmustclickApplytoapplythechangesand
tosavethesettings.