D-Link DWL-3600AP - Modifying Radio Settings

ModifyingRadioSettings
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page58
UnifiedAccessPointAdministrator’sGuide
ModifyingRadioSettings
RadiosettingsdirectlycontrolthebehavioroftheradiodevicesintheAPanditsinteractionwiththephysical
medium;thatis,howandwhattypeofelectromagneticwavestheAPemits.
Tospecifyradiosettings,clicktheRadiotabintheManagesection.
Differentsettingsdisplaydependingonthemodeyou
select.AllsettingsaredescribedinTable19onpage60.
Figure15:ConfiguringRadioSettings
Note:ThefollowingnotesapplytoAeroScoutproductandprotocolsupport:
•D‐Linkdoesnotsell AeroScoutproducts.ContactAeroScoutforAeroScouthardware,softwareor
deploymentinformation.
•TheAEprotocoldoesnotsupportanyauthenticationorencryptionbetweentheAEserverand
theaccesspoint.
•TheAEprotocolrequiresradiostooperate
inpromiscuousmode.ThismeansthattheAPreceives
andprocessesallpacketsdetectedbytheradios,asopposedtoprocessingonlypacketsdestined
totheAPsBSSID.ThiscanaffectAPthroughput.