D-Link DWL-3600AP

ControllingAccessbyMACAuthentication
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page87
UnifiedAccessPointAdministrator’sGuide
ConfiguringMACAuthenticationontheRADIUSServer
IfyouuseRADIUSMACauthenticationforMAC‐basedaccesscontrol,youmustconfigureastationlistonthe
RADIUSserver.ThestationlistcontainsclientMACaddressentries,andtheformatforthelistisdescribedin
thefollowingtable.
Note:AfteryouconfigurelocalMACAuthenticationsettings,youmustclick Applytoapplythe
changesandtosavethesettings.ChangingsomesettingsmightcausetheAPtostopandrestart
systemprocesse s.Ifthishappens,wirelessclientswilltemporarilyloseconnectivity.Werecommend
thatyouchangeAPsettingswhen
WLANtrafficislow.
Table31:RADIUSServerAttributesforMACAuthentication
RADIUSServerAttribute Description Value
User‐Name(1) MACaddressoftheclientstation. ValidEthernetMAC
Address.
User‐Password(2) AfixedglobalpasswordusedtolookupaclientMAC
entry.
NOPASSWORD