D-Link DWL-3600AP - Figure 45: Cluster Information and Member Configuration; Figure 46: Cluster Information and Member Configuration

ManagingAccessPointsintheCluster
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page150
UnifiedAccessPointAdministrator’sGuide
ThefollowingfigureshowstheCluster>AccessPointspagewhenclusteringisnotenabled.
Figure45:ClusterInformationandMemberConfiguration
ThefollowingfigureshowstheClust er>AccessPointspagewhenclusteringisenabledandtwoaccesspoints
areinthecluster.
Figure46:ClusterInformationandMemberConfiguration
Ifclustering
iscurrentlydisabledontheAP,theStartClusteringbuttonisvisible.Ifclusteringisenabled,the
StopClusteringbuttonisvisible.Youcanedittheclusteringoptioninformationwhenclusteringisdisabled.