D-Link DWL-3600AP - Page 119

RestoringtheConfigurationfromaPreviouslySavedFile
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page119
UnifiedAccessPointAdministrator’sGuide
UsethefollowingstepstosaveacopyofthecurrentsettingsonanAPtoabackupconfigurationfilebyusing
HTTP:
1. SelectHTTPforUploadMethod.
2. UsertheBrowsebuttontoselectthefi letorestore.
3. ClicktheRestorebutton.
AFileUploadorChooseFiledialogboxdisplays.
4. Navigatetothedirectorythatcontainsthefile,thenselectthefiletouploadandclickOpen.
(OnlythosefilescreatedwiththeBackupfunctionandsavedas.xmlbackupconfigurationfilesarevalidto
usewithRestore;forexample,
ap_config.xml.)
5. ClicktheRestorebutton.
Adialogboxopensverifyingtherestore.
6. ClickOKtoproceed.
TheAPreboots.Arebootconfirmationdialogandfollow‐onrebootingstatusmessagedisplays.Pleasewait
fortherebootprocesstocomplete,whichmighttakeseveralminutes.
TheAdministrationWebUIisnotaccessibleuntilthe
APhasrebooted.