D-Link DWL-3600AP

ConfiguringClientQoS
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page183
UnifiedAccessPointAdministrator’sGuide
7. EnableClientQoSontheAP.
setclient‐qosmodeup
8. UsetheapQosGlobalModeobjecttosetthestatustoup(1),whichenablesClientQoSontheAP.
9. WalktheapVapDescriptionobjecttoviewtheinstanceIDforVAP2(wlan0vap2).
VAP2onRadio1isinstance5.
10. UsetheapVapQosModeobjecttosetthestatusofVAP2to
up(1).
11. UsetheapVapPolUpobjecttoapplypol_voiptoVAP2intheinbounddirection(fromtheclienttotheAP).
Thepolicynameisthete xtstring,andnottheASCIIcode.