D-Link DWL-3600AP - Page 98

ConfiguringSNMPontheAccessPoint
D-Link UnifiedAccessPointAdministrator’sGuide
November2011 Page98
UnifiedAccessPointAdministrator’sGuide
Communitynamefor
traps
EntertheglobalcommunitystringassociatedwithSNMPtraps.Thevalidrangeis
1‐256characters.
Trapssentfromthedevicewillprovidethisstringasacommunityname.
Thecommunitynamecanbeinanyalphanumericformat.Specialcharactersare
notpermitted.
HostnameorIPaddress Enterthe
DNShostnameofthecomputertowhichyouwanttosendSNMPtraps.
Thevalidrangeis1‐256characters.
AnexampleofaDNShostnameis:
snmptraps.foo.com. SinceSNMPtrapsaresent
randomlyfromtheSNMPagent,itmakessensetospecifywhereex actlythetraps
shouldbesent.YoucanadduptoamaximumofthreeDNShostnames.Ensureyou
selecttheEnabledcheckboxbesidetheappropriatehostname.
Note:AfteryouconfiguretheSNMPsettings,youmustclickApplytoapplythechangesandtosave
thesettings.ChangingsomesettingsmightcausetheAPtostopandrestartsystemprocesses.Ifthis
happens,wirelessclientswilltemporarilyloseconnectivity.WerecommendthatyouchangeAP
settingswhenWLAN
trafficislow.
Table36:SNMPSettings(Cont.)
Field Description