Data General Service ECLIPSE MV/7800 - Change Preset Values Program Responses; Change Preset Values Menu

FS-12742
Figure 6-17. Change Preset Values Menu
6.7.2 Change Preset Values Program Responses
INPUT
1, CR or
NEW LINE
PROGRAM RESPONSE
Immediately continues the normal power-up sequence.
2
Interrupts the power-up sequence and allows the system data and time
to be changed.
3
Interrupts the power-up sequence and allows the software from a device
other than the automatic program load device (default device) to loaded.
4
Interrupts the power-up sequence and allows selection of a different
automatic program load device (default device).
5
Interrupts the power-up sequence and allows you to change the time
that the computer waits before continuing the normal power-up
sequence when you do nothing in response to the Automatic Program
Load Menu.
6
Interrupts the power-up sequence and allows you to enter the SCP.
043-003621

6-30

DGC
CONFIDENTIAL - INTERNAL USE ONLY