Data General Service ECLIPSE MV/7800 - BREAK>B - Send BREAK; BREAK>C - Conversation Mode ON;OFF 2-12, 2 C09; BREAIC>D - Local Console ENABLE;DISABLE; BREAIC>E - End Session

Not all commands are valid at all terminals.
A
<BREAIC>H at all terminals will provide a help table. Table 2-2,
the help table, lists the commands, and the terminals and access levels at which the commands can be used.
Complete command descriptions are given in the following subsections.
<BREAK>A -
Password VIEW/CHANGE
2.10.1
<BREAK>B -
Send BREAK
2.10.2
<BREAK>C -
Conversation Mode ON/OFF
2.10.3
<BREAK>D -
Local Console ENABLE/DISABLE
2.10.4
<BREAK>E -
End Session
2.10.5
<BREAK>H -
HELP
2.10.6
<BREAK>.1 -
Dial String VIEW/CHANGE
2.10.7
<BREAK>M -
Remote Mode - SYSTEM
2.10.8
<BREAIC>N -
Remote Mode - NONE
2.10.9
<BREAIC>Q -
Access Level VIEW CHANGE
2.10.10
<BREAIC>R -
Local Console Read-only ON/OFF
2.10.11
<BREAIC>U -
USER Mode
2.10.12
<BREAIC>V -
Configuration VIEW/CHANGE
2.10.13
<BREAK>? -
Status
2.10.14
Table 2-2. COMSWITCH-H Functional Commands
VALID ACCESS LEVEL
COMMAND
DESCRIPTION
SYSTEM
CONSOLE
REMOTE
TERMINAL
A
Password

VIEW/CHANGE
N
B
Send BREAK
na
L, F
C
Conversation Mode

ON/OFF
N, L, F
L, F
D
Local Console

DISABLE/ENABLE
F
E
END Session
N, L, F
N, L, F
H
HELP
N, L, F
N, L, F
J
Dial String 
VIEW/CHANGE
N
M
Remote Mode

- SYSTEM
F
N
Remote Mode

- NONE
N, L, F
N, L, F
Q
Access-Level 
VIEW CHANGE
N, L, F
R
Local Console Read-only ON/OFF
F
F
U
Remote Mode

- USER
L, F
V
Configuration

VIEW CHANGE
N
F
?
Status
N, L, F
N, L, F
Where: N = NONE, L = LIMITED, F = FULL
na: not applicable - on the MV/7800, System Console BREAK always means
"enter the SCP-CLI>".
DGC CONFIDENTIAL - INTERNAL USE ONLY

2-9 
043-003621