SOFTWARE CONFIGURATION
124
MATRIX 320
READER CONFIGURATION
For an example of Matrix device configuration see the example in Chapter 1, Rapid Con-
figuration
, Steps 7-8.
When all the configuration parameters are set correctly and saved to the device, you
can perform a Backup to File and/or to an External storage device (BM100, etc.). See
"
Backup and Restore Through DL.CODE" on page 160.
NOTE
Especially for lengthy configurations, it is always good practice to peri-
odically save the configuration to permanent memory (Save on Device)
to avoid losing the configuration in Temporary Memory. You must give a
name to the new configuration or overwrite an existing one (except for
Default which cannot be modified).
NOTE
Matrix 320 can contain several configurations or jobs in permanent
memory.
This means that in addition to your application configuration(s), the
Default configuration is always present on the reader and in fact it is not
modifiable and cannot be deleted.
To Next Page
Loading...
