PRODUCT REFERENCE GUIDE
31
CHAPTER 2
INTRODUCTION
PRODUCT DESCRIPTION
Matrix 320 is a Datalogic industrial compact 2D imager designed and produced to be a
high performance affordable solution for both linear and two-dimensional code reading
applications.
Matrix 320 uses imaging technology and provides complete reading system functions by
integrating image capturing, decoding and communicating in a single compact and ver-
satile product.
Matrix 320 sets a new standard in 2D imager technology offering high performance with
improved reading flexibility thanks to its intrinsic modularity.
Matrix 320 features excellent reading and verifying performance thanks to a superior
2.0 Mega pixel sensor (1920 x 1080 pixels) and smart proprietary decoding libraries.
The modular combination of lenses, illumination, filters, and accessories provide high
flexibility in covering applications with various requirements.
Innovative X-PRESS™ interface, combined with a new aiming system, Green and Red
Spots, and new 360 degree Visual Feedback through colored LEDs, enhance the ease of
setup and use.
Rugged construction, IP67 and IP65 protection and max. 45°C operative temperature
make the Matrix 320 the ideal product for industrial applications.Matrix 320 has been
developed for use in numerous industries such as:
Factory Automation
• End of line traceability
• Secondary packaging traceability
• Print & Apply
• WIP traceability (automatic)
• Component/part traceability
• Direct Part Marking (DPM) reading
Intralogistic Automation / Automated Warehouses / Distribution Centers
• Reverse Logistics
• Retrieval for outbound (forklift)
• Pallet traceability / pallet wrapping
• Palletizing (automatic or manual) / cage preparation
• Order fulfillment (automatic or manual)
• Depalletizing - Part traceability
• Print & Apply verification (re-labeling)
To Next Page
Loading...
Need help?
General
