Datalogic Matrix 320 - Restore Defaults; Restore Default Environment

RESTORE DEFAULTS
PRODUCT REFERENCE GUIDE 163
RESTORE DEFAULTS
The device parameters are divided into two main classes, Configuration and Environ-
ment which are affected differently by the Restore Defaults commands.
• The Configuration parameters are the ones set in the various steps of the configu-
ration process and are specific to each application. When multiple configurations
(jobs) are saved on a single device, these parameters can be different from one
configuration to the next.
• Environment parameters regard the device Identity and Position in a Network
(Ethernet, ID-NET, etc.) and are not influenced by the Default (or any other) Con-
figuration present in memory.
Restore Default Environment
Restore Default Environment returns all Environment parameters to their factory
default settings. The default IP address will be restored as well as all the parameters
managed in the Device Environment Configuration window.
The Factory Default static IP address for all
Matrix N Family readers is:
IP Address = 192.168.3.100
Go to the Device menu >Backup/Restore > Restore Defaults > Restore Default Startup
Configuration.
Any previously saved configurations on the device will remain in memory, but the
Default configuration is set as the startup configuration.