BACKUP AND RESTORE THROUGH DL.CODE
PRODUCT REFERENCE GUIDE
161
Backup
To perform a Backup:
1. From the DL.CODE Device menu, select either Single Reader Backup (to file on
PC); or Backup to external storage device.
You will be reminded that configuration in temporary memory will not be saved so you
should save the configuration to the reader before performing Backup.
If you are performing a backup to a file you will be asked whether to include the firm-
ware or not.
At the end of the backup, DL.CODE shows a message indicating successful completion.
NOTE
For ID-NET network Backup, select the Backup current Internal Network
configurations selection.
To Next Page
Loading...
