Datalogic Matrix 320 Product Reference Guide

INTERNAL NETWORK CONFIGURATIONS
PRODUCT REFERENCE GUIDE 147
When finished, all the Slaves should have been correctly recognized. If not, verify all
device connections and power and then repeat the operation by clicking on the Start
Net Autoset button.
Depending on the application, select one of the Default Internal Network Configura-
tions: Multidata, Synchronized Phase Mode or Synchronized PackTrack.
This selection will open a pre-configured job for the Master reader according to the
selection. Follow the specific application instructions in the following paragraphs.
Repeat
Multidata
Synchronized

Datalogic Matrix 320 Specifications

General

Brand	Datalogic
Model	Matrix 320
Category	Barcode Reader
Language	English