1. Usage, data AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
10 Operating Instructions (Version 03/2018)
1.3. Scope of delivery
The following components are included in the delivery of the firing furnace:
• AUSTROMAT
®
664 iSiC
®
or 674 baSiC
2
firing furnace with power cable,
• Insulation table, one sinter ring, one sinter plate, and furnace tweezers (only 664 iSiC
®
),
• Instructions for use,
• Packaging material:
• Cardboard boxes,
• Foam material for protecting against impacts,
• Calibration set for calibrating the temperature.
Ensure that delivery is complete, and that the components have not suffered any visible
damage in transport. If this is not the case, please immediately contact your service partner.
Please store the packaging in case you need to ship the equipment at a later date.
To Next Page
Loading...