AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
6. Operation
Operating Instructions (Version 03/2018) 101
[Paste] Copies the selected firing program of the external set to the current
set. The firing programs are inserted into the current set starting at
the selected program number. A query appears and asks if you want
to overwrite the existing programs in the current set. Confirm the
query to insert the firing programs.
[Select all] Selects the firing programs of the external set.
[ESC] Returns to the Program Manager.
The message "Successfully loaded" appears after the set has been loaded. Click [OK] to return
to the Program Manager.
6.7. Backing up and restoring data
You can back up or restore all the data for the firing furnace control (saved operating systems,
software, set parameters and firing programs) with the backup/recovery function the "Setup"
menu" (see section 5.8.4.5).
NOTE
:
For reasons of data safety and to prevent the loss of firing oven data, it is
recommendable to regularly back up all your data.
To Next Page
Loading...