Dekema AUSTROMAT 674 baSiC - Access through a Browser or a VNC Program

AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
4. Start-up
Operating Instructions (Version 03/2018) 39
3. The logon window appears.
a. Enter the password in the “Password” entry line. The standard password is "DEKEMA".
b. Click on [OK].
Fig. 4-12 Login window
4. The Program Manager appears in the VNC window (see section 5.3).
You can now operate the firing furnace using the VNC program. Now set up the authorizations
for accessing the firing furnace (see section 4.5.5).
4.6.3. Access through a browser or a VNC program
You can now operate the firing furnace using either a browser or the VNC program.