Dekema AUSTROMAT 674 baSiC - Storage and Disposal; Storage

8. Storage and disposal AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
120 Operating Instructions (Version 03/2018)
8. Storage and disposal
8.1. Storage
Turn off the firing furnace
WARNING
Fire hazard.
A fire hazard exists when the firing furnace is hot when
packaged.
Let the firing furnace cool for several hours to room
temperature with the firing chamber open after turning it off.
Proceed as follows:
1. Turn the firing furnace off, and let it cool to room temperature. Note that the device needs
several hours to cool down.
2. Turn the firing furnace on, and move the insulation table up to close the firing chamber.
3. Turn the device off, and fold the power cable from the plug.
Storage Requirements
The firing furnace may only be stored in the original packaging. Observe the packaging symbols
(see Fig. 4-1), and maintain the storage conditions in section 1.6.