AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
1. Usage, data
Operating Instructions (Version 03/2018) 9
1.2. Proper use
The AUSTROMAT
®
firing furnace was designed for firing dental ceramic objects. In every task
that you perform with the firing furnace, observe the safety instructions in the section Safety.
Every use that
goes beyond these instructions is held to be improper and can cause personal
injury or property damage. We assume no guarantee when the device is improperly used
handled or not used according to instructions. DEKEMA assumes no liability for damages that
are thereby incurred.
In particular, materials may not be heated that may trigger explosions, implosions and
hazardous or hazardous or flammable gases.
Proper use also includes the following:
• Read and following these instructions for use,
• Observe the technical data (see section 1.5),
•
Perform
service tasks in a timely manner. (see section 7).
To Next Page
Loading...