5. User interface AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
76 Operating Instructions (Version 03/2018)
5.8.3. Maintenance programs
5.8.3.1. Drying
Use the drying program to dry the firing chamber, for example when the firing furnace has been
exposed to a high-level of humidity for a long time.
In the "Setup" menu, click the [Drying] button. The following window appears for starting the
drying program.
Fig. 5-26 Setup > Drying
Buttons
• [Start]:
Starts the drying program (duration: approximately 90 minutes).
• [ESC]:
Closes the window and switches back to the "Setup" menu.
Start the program Mount the firing table and click [Start]. The "Dry" window is displayed
as long as the program is running. You can terminate the program at
any time when you click the [Stop] button. A safety query opens and
asks you whether you really want to end the program:
• [OK]: Confirm your decision and in the program,
• [ESC]: Change your decision and continue the program.
To Next Page
Loading...