1. Usage, data AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
8 Operating Instructions (Version 03/2018)
1. Usage, data
1.1. Introduction
Dear customer,
You are in possession of a new, exceptional AUSTROMAT
®
firing furnace.
DEKEMA’s many years of experience in the field of firing furnace construction have gone into
this equipment ensuring a very high level of quality, and exceptional performance and reliability.
In order to take full advantage of the possibilities that your firing furnace offers and obtain
superior results, we would like to ask you to spend a little time studying these operating
instructions.
• The technical data and description of the usage of the firing oven can be found in section 1
Usage, data.
•
Before you st
art using the firing furnace, it is essential that you read 2 Safety to prevent
persona
l injury and property damage.
• Section 3 Design and functionality provides a short description of the firing furnace.
•
Ho
w to set up and start the firing furnace is described in section 4 Start-up. Here you will
find how to connect the firing furna
ce to a network or an individual computer.
• The menu control of the firing furnace is described in detail in section 5 User interface.
•
The ope
ration of the firing furnace is explained in section 6 Operation, from the first steps in
to the crea
tion of firing programs. Practical examples and tips will help you identify the
sources of troubles and assist you in eliminating them.
• Follow the suggestions for the service and maintenance of the device in section 7
Maintenance and Service.
•
Finally, the index enabl
es you to quickly find specific functions or commands.
Fig. 1-1 AUSTROMAT
®
664 iSiC
®
(left) and AUSTROMAT
®
674 baSiC
2
(right)
To Next Page
Loading...