AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
5. User interface
Operating Instructions (Version 03/2018) 75
5.8.2.4. Lift settings
NOTE:
For safety reasons, DEKEMA recommends not deactivating the warning.
When the "Warning" function is turned on, a warning appears before you open a hot firing
chamber (temperature higher than 200°C). You are asked, "OPEN LIFT?". Confirm the query
when you want to move the lift down and open the hot firing chamber.
Fig. 5-25 Setup > Lift settings
Buttons
• [OK]:
Accepts the settings and switches back to the "Setup" menu.
Warning Click the button to activate the warning display. A green field within
the button indicates that the function is active
To Next Page
Loading...