Dekema AUSTROMAT 674 baSiC - 7.7. Service Partners and Transport

AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
7. Maintenance and Service
Operating Instructions (Version 03/2018) 119
7.7. Service and Transport
NOTE:
Before each maintenance and service task: Read section 2, Safety. In particular, be aware
of the hazards listed in section 2.4.
NOTE
:
These operating instructions are part of the documentation for the AUSTROMAT
®
firing
furnace. Read the service instructions before servicing.
Service partners
We recommend regular maintenance of the firing furnace by your service partner. This will
ensure superior firing results. Contact the responsible service partner if you need to replace
wearing parts or if the firing furnace needs to further repairs.
Spare parts
Only use original DEKEMA parts for servicing and maintaining the firing furnace. Contact your
service partner, or contact DEKEMA directly.
Manufacturer address
Please direct any questions for the manufacturer to the following address:
DEKEMA Dental-Keramiköfen GmbH
Industriestrasse 22
D-83395 Freilassing
Tel. +49-8654-4639-0
Fax +49-8654-66195
E-mail: info@dekema.com
Website: www.dekema.com
Transport
• Turn off to the firing furnace as described in section 8.1.
• To tran
sport the firing furnace, only use the original box and the supplied packaging
material.