AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
2. Safety
Operating Instructions (Version 03/2018) 21
WARNING
Fire hazard.
The firing chamber can reach temperatures above 1,500°C
during operation. Heat-sensitive materials close to the firing
furnace can easily ignite and cause a fire.
Observe the following instructions:
• Never operate the firing furnace without the insulation table
being mounted,
• The vent holes in the cover of the firing chamber must be
unobstructed,
• Make sure that flammable materials (such as cleaning
alcohol, wiping cloths, etc.) or objects that can be damaged
by heat are sufficiently distance from the firing furnace.
• Never operate the firing furnace without supervision.
WARNING
Hot surfaces.
The firing chamber can reach temperatures above 1,500°C
during operation. There is an extreme burning hazard from
touching hot surfaces after the firing chamber is opened.
Never directly contact hot parts of the firing furnace. The firing
furnace requires several hours to cool after it is turned off.
Observe the following instructions:
• Do not use your hands or any objects to grasp things in the
firing chamber,
• Do not grasp the lift seat, insulation table or firing objects
with your bare hands,
• Use suitable tools (tweezers) to remove the firing objects, or
wear safety gloves.
WARNING
The firing furnace is heavy.
When the firing furnace is transported, there exists the danger
of crushing, and the device may become damaged.
At least two persons must transport the firing furnace. Wear
safety gloves.
To Next Page
Loading...