AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
5. User interface
Operating Instructions (Version 03/2018) 53
Command line Shows the individual program steps with the firing program in
"CVTL" syntax. Click on the command line to open the program
editor to change the firing parameters (see section 5.7.1).
Buttons
in the
function b
ar:
• [GO TO]
Opens the numeric keyboard window so that you can select a
program by its number.
• [Pictures]
Opens a window for selecting a picture (see section 5.5.2).
• [Save]
Saves the progra
m
.
• [Edit program]
Opens the program editor to change the firing parameters. (see
section 5.7).
• [Start Program]
Starts the pro
gram (see also the section 5.6). The [Start program]
button is autom
atically replaced by the [Abort program] button after
the program starts.
• [Cancel Program]
Prematurely terminates a running program. The [Cancel program]
button is then automatically replaced by the [Start program] button.
After a program is canceled, the heating system turns off, and the
firing furnace cools down. The firing number is not increased during
firing.
• [ESC]
Terminates the program display and opens the Program Manager
(see section 5.3).
[
=> S
equence]
[=> Sequence]
The two sequence keys move the cursor through the individual
program steps. The intervals have a colored background in the
graphic.
To Next Page
Loading...