5. User interface AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
70 Operating Instructions (Version 03/2018)
Buttons
• [OK]:
Accepts the settings and switches back to the "Setup" menu.
Lock programs Select the locked program memories as follows:
• Click on the corresponding program numbers "from" and "to".
The numeric keyboard window appears.
• Enter the desired program numbers.
• Click on [OK].
Fix Activating this button marks the firing programs in the locked
memories as fix programs. The firing parameters of these programs
can be adjusted for a single program run, but they cannot be saved.
The Program Manager automatically appears when a fix program
execution is completed.
The LED inside the button indicates when the Fix function is active.
Programs locked by the general code are marked in the Program Manager with a lock and have
a colored background. In the program display, a lock in the information bar indicates that a
program is protected.
Fig. 5-20 Lock symbol for protected programs
Deactivate general code
• In the "Setup" menu, click the [General code] button. The alphanumeric keyboard window
appears.
• Enter the password for the general code.
The general code is deactivated.
Change locked programs
Change the locked program memories when the general code is activated as follows.
• Deactivate the general code.
• Reactivate the general code, and change the locked program range as desired.
To Next Page
Loading...