AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
5. User interface
Operating Instructions (Version 03/2018) 87
Buttons
• [ESC]:
Closes the window and switches back to the "Setup" menu.
User name User name for your access the FTP server.
• Click on the “User name” entry field. The alphanumeric
keyboard window appears.
• Enter your user name.
Password Password with which you have access to the FTP server.
• Click on the “Password” entry field. The alphanumeric keyboard
window appears.
• Enter your password.
IP address IP address of the FTP server.
• Click on the corresponding "IP address" entry field. The numeric
keyboard window appears.
• Enter the IP address of the FTP server.
Login Click the button to connect the firing furnace to the indicated FTP
server. An LED within the button indicates that the connection is
active.
Establish a connection to the FTP server
The connection with an FTP server is only established if all access data (user name, password,
IP address) are correct. Proceed as follows to connect the firing furnace to an FTP server.
1. Enter the user name for your FTP access.
2. Enter the password for your FTP access.
3. Enter the associated IP address of the FTP server.
4. Click [Login] to establish the connection between the firing furnace and FTP server.
When you want to terminate the connection, reclick [Login].
To Next Page
Loading...