Deviser DS2831 - Page 15

Part I: DS2831 Basics
15
High-speed charging deck, with dual battery slots
With either method, once the instrument reaches full charge, it is recommended to charge for 1 additional
hour to help extend the operation time. After charging, unplug the DC connector, and then pull out the AC
adapter from the outlet.
To avoid overheating, do not leave the AC adapter and power supply connected while storing.
NOTE: Charge the instrument fully before using it for the first time.
Adapter Specifications
Model No.
FSP060
-
DBAE1
AC input
~100
-
240V,
1.5A, 50
-
60Hz
DC output
12.0V 5A MAX