Operation
Operating Instructions 867 - 04.0 - 03/2018 31
17. Insert the needle thread through the needle eye in such a way
that the loose thread end faces the hook.
For machines with a short thread cutter
18. Pull the needle thread through the needle eye until the loose
thread end has a length of approx. 4 cm with the thread lever (15)
at the highest position.
Important
Check the thread length.
If the loose thread end is too long, the needle thread may be caught
by the hook and cause a disturbance. If the loose thread end is
too short, the machine cannot start sewing.
To Next Page
Loading...
