Why is speed limited due to insufficient mains voltage on DURKOPP ADLER 867 Sewing Machine?
If the speed is limited on your DURKOPP ADLER Sewing Machine due to insufficient mains voltage, check the mains voltage.
What to do if position not reached during thread cutting on DURKOPP ADLER 867?
If the position is not reached during thread cutting or reversal on your DURKOPP ADLER Sewing Machine, check the controller settings and change them if required. Also, make mechanical adjustments to the machine, such as checking the thread cutter and belt tension. Ensure the thread lever is at the top dead center.
Why is my DURKOPP ADLER Sewing Machine skipping stitches?
General| Stitch Type | Lockstitch |
|---|---|
| Max Stitch Length | 12 mm |
| Needle System | 134-35 |
| Needle Thread Tension | Adjustable |
| Lubrication | Automatic |
| Type | Industrial Sewing Machine |
| Max Sewing Speed | 3000 stitches per minute |
| Presser Foot Lift | 20 mm |
| Power Requirements | 230V/50Hz |
To Next Page