Epson PowerLite 4100 User Manual

Operator's Guide 87
SYSTEM OPTIONS
Pressing
YES
prints out the first of the system options listed below:
•
Factory Reset
•
•
Lock Character Set and Emulation
•
Initialize Sensitivity
•
Vertical Alignment
Factory Reset
Note
: If you reset the configuration menu settings to factory defaults, all
custom characters previously downloaded with universal control
commands are lost.
Press
YES
to reset all configuration menu settings to factory defaults.
Before actually resetting, the printer prints "Reset Menu Settings to
Defaults?" Press
YES
to execute the factory reset. After a couple of
seconds, the printer prints “Reset Done.”
Lock Character Set and Emulation
Pressing
YES
prints out the active setting:
•
Off (factory default)
•
On
Pressing
YES
to "On" causes the printer to hide configuration menu
selections for "Emulation" (Page 80) and "Character Options" (Page 81).
With the character set and emulation locked, the options, queries, and
settings for "Emulation" and "Character Options" do not appear as you
navigate through the configuration menu. However, the emulation and

Epson PowerLite 4100 Specifications

General

Brand	Epson
Model	PowerLite 4100
Category	Projector
Language	English