Operator's Guide 33
CHANGING EMULATIONS
The factory default startup emulation is
Epson FX-100
, which means that
the printer acts like an Epson FX-100 printer after you turn on the power.
You can change the default startup emulation using the configuration
menu. The other two emulation selections are
IBM Proprinter XL
and
DEC LA210
.
To change emulations, use a power-up or on-line hot key to enter the
configuration menu:
1. Either press
FORM FEED
and then turn on the printer;
+
or, with the printer already on, press and hold
ON LINE
and then
simultaneously press
FORM FEED
and
LINE FEED
.
+ +
The printer prints out:
HELP OPTIONS
2. Respond by pressing
NEXT
.
The printer prints out:
INTERFACE OPTIONS
•
To Next Page
Loading...
