28 Operations
RUNNING A SELF TEST
Warning!
If you run self test with the operator access door
open, make sure no article of clothing (necktie,
jewelry) is hanging into the operator access.
+
While pressing
LINE
FEED
, turn
on printer to begin a rolling
printout of keyboard characters.
To stop printout, press
ON LINE
or turn off the printer.
Note
: As a safety feature, when using “fast pitch” (10 pitch printing), the
printer prints at half speed if the operator access door is open. To
temporarily cancel half-speed printing during a self test, press and
hold
TOF
while the printer prints.
Self Test Printout
JB0-AI
To Next Page
Loading...
