Operator's Guide 73
Skip Perf
Pressing
YES
prints out:
•
Off (factory default)
•
On
Off: The printer prints across the horizontal perforation, unless instructed
otherwise by the computer's software application.
This is the preferred setting in most instances. In general, leave it off if
you print on label stock.
On: The printer automatically leaves a ½ in. white space before and after
the TOF setting.
Consider using the "on" setting when printing unformatted ("straight
ASCII") text.
LF on CR
Pressing
YES
prints out:
•
Off (factory default)
•
On
Note
: Regardless of this setting, the printer automatically performs a
printer-supplied line feed and carriage return when the output line
buffer is full.
Off: The printer does not supply a line feed command after it executes a
carriage return command sent from the computer.
This is the preferred setting since most computer software applications
supply all vertical positioning commands.
To Next Page
Loading...
Need help?
General