Operator’s Guide 141
EMULATION MODE
SOH A z A Select Emulation and Reset Printer
ASCII:
SOH A z A (n)
Control:
CTRL
AA z A (n)
Decimal:
1 65 122 65 (n)
Hexadecimal:
01 41 7A 41 (n)
Selects the printer emulation mode and the character set that has been
selected from the configuration menu for the selected emulation. n
*
specifies the emulation as follows:
•
n = 0: Epson FX-100 emulation
•
n = 1: IBM Proprinter XL emulation
•
n = 3: DEC LA210 emulation
This command also initializes the printer. It initiates the same process as
turning the printer on. The printer functions as specified by the
configuration menu.
*
(n) can be, for example, decimal 1 or ASCII character 1.
To Next Page
Loading...
