Operator's Guide 49
EXITING THE CONFIGURATION MENU
There are three ways to exit the configuration menu:
•
Turn off the printer.
•
Press
EXIT
until the printer advances to the next top of form.
•
Press
ON LINE
along with
LINE FEED.
If you have made default setting changes, the new default selections take
effect immediately after exiting the configuration menu or when the printer
is turned on again.
If it becomes necessary to return to the factory defaults after configuration
changes have been made, the configuration menu includes an option
called Factory Reset, which restores the factory default settings. (See
“Factory Reset,” Page 87.)
To Next Page
Loading...
