Operator's Guide 299
PITCH
ESC [ (n) w Select Pitch
ASCII
: ESC [ (n) w
Control
:
CTRL
[[ (n) w
Decimal
: 27 91 (n) 119
Hexadecimal
:1B5B(n)77
Sets the number of characters printed per horizontal inch. n specifies the
pitch as follows:
Pitch: 5 6 7.5 8.33 9.1 10 10 12 15.0 16.67 18.2
Value of n
ASCII567890123418
Decimal535455565748495051524956
Hexadecimal35 36 37 38 39 30 31 32 33 34 31 38
10 pitch may also be selected using ESC [ w, without sending parameter
n.
Changing the pitch resets left and right margins to default settings.
ESC [ ? 2 9 h Select Font Pitches
ASCII
:ESC[ ?29h
Control
:
CTRL
[[ ?29h
Decimal
:2791635057104
Hexadecimal
:1B5B3F323968
Sets pitch select mode to font pitches. In this mode, only certain
character widths are printed. If currently printing in 10.0 to 18.2 pitch, only
10 characters per inch are printed. If printing in 5.0 to 9.1 pitch, only 5
characters per inch are printed.
To Next Page
Loading...
Need help?
General