60 Configuration
Parallel. Enables communication on the parallel interface connector on
the back of the printer. For information concerning parallel
communications, see Appendix C.
Serial. Enables communication on the serial interface connector on the
back of the printer. For information concerning serial communications,
see Appendix B.
If you select "Serial," double-check the serial interface settings under
"Serial Options"—the next configuration menu item.
Serial Options
Pressing
YES
prints out the first of the serial options listed below:
•
Protocol
•
•
DTR Polarity
•
Robust X-ON
•
X-OFF When Off Line
•
Baud
•
Data Bits
•
Parity
•
Stop Bits
If the active interface is "Serial," then the settings for serial options must
match those of the computer.
To Next Page
Loading...
