Epson PowerLite 4100 User Manual

244 IBM Proprinter Control Commands
PRINT STYLE
SI or ESC SI Condensed Pitch
ASCII: SI
Control:
CTRL
0
Decimal: 15
Hexadecimal: 0F
ASCII: ESC SI
Control:
CTRL
[
CTRL
O
Decimal: 27 15
Hexadecimal: 1B 0F
Increases character pitch according to the table below. Increasing
character pitch allows more characters to be printed per line. ESC SI
duplicates the function of the SI command.
Current Pitch After SI or ESC SI
5.0 8.57
6.0 9.1
7.5 9.1
10.0 17.14
12.0 18.2
15.0 18.2
Current character pitches of 8.33, 8.57, 9.1, 16.67, 17.14, and 18.2 are
unaffected by this command. See DC2, on the following page, to cancel
condensed pitch.
Example
REM SET 12 PITCH,
REM THEN CHANGE TO 10 PITCH.
REM AFTER THAT CHANGE TO 17.14 PITCH, AS FOLLOWS
LPRINT CHR$(27);CHR$(58);
LPRINT "Now printing in 12 cpi."
LPRINT CHR$(18);
LPRINT "Now printing in 10 cpi."
LPRINT CHR$(15);
LPRINT "Now printing in 17.14 cpi."
LPRINT
CHR$(13);

Epson PowerLite 4100 Specifications

General

Brand	Epson
Model	PowerLite 4100
Category	Projector
Language	English