Operator's Guide 105
The printer prints a two-line pattern of vertical lines. The top row of
lines should be vertically in line with the bottom row:
Proper Vertical Alignment
| | | | | |
| | | | | |
Back or Next to adjust, Yes when done
| | | | | |
| | | | | |
Improper Vertical Alignment
| | | | | |
| | | | | |
Back or Next to adjust, Yes when done
| | | | | |
| | | | | |
If the top line is too far to the left, as shown above, press
NEXT
to
move the top line to the right.
If the top line is too far to the right, then press
BACK
to move the top
print line to the left.
The printer prints out the result of the re-alignment.
5. Continue using
BACK
and
NEXT
to align the two lines.
6. When finished with vertical alignment, press
YES
to save the
alignment and to proceed to the next configuration menu option.
7. Press
EXIT
twice to leave the configuration menu.
To Next Page
Loading...
Need help?
General