190 Epson FX-100 Control Commands
The following example shows the code necessary to cause the printer to
print the following graphic pattern:
Note:
n/216 vertical line spacing may be used in graphic printing. n/216
in. line spacing is approximated using 1/144 in. steps. Maximum
local and cumulative error is - 1/216 in.
Example
REM PRINT AN X SHAPED PATTERN USING SINGLE
REM DENSITY GRAPHICS
LPRINT CHR$(27);"K";CHR$(8);CHR$(0);
FOR I = 1 TO 8
READ D
LPRINT CHR$(D);
NEXT I
LPRINT
DATA 129,66,36,24,24,36,66,129
Printhead
MSB
LSB
d1 - d8 = 129 66 36 24 24 36 66 129
AB0-AH
To Next Page
Loading...
Need help?
General