240 IBM Proprinter Control Commands
LF Linefeed
ASCII: LF
Control:
CTRL
J
Decimal: 10
Hexadecimal: 0A
Prints any data in the print buffer and advances the paper one line. If
Auto Carriage Return (CR on LF) is enabled, a carriage return is
performed after the linefeed.
This control code cancels control code SO.
ESC 5 Auto Linefeed
ASCII:
ESC 5 (n)
Control:
CTRL
[5 (n)
Decimal:
27 53 (n)
Hexadecimal:
1B 35 (n)
Sets and cancels automatic linefeed (LF on CR). n specifies whether the
function is set or cancelled as follows:
•
n = 1: Set automatic linefeed
•
n = 0: Cancel automatic linefeed
When automatic linefeed (LF on CR) is set, the printer does a linefeed
each time a carriage return is received.
ESC 5 overrides the automatic linefeed option set from the configuration
menu.
FF Form Feed
ASCII: FF
Control:
CTRL
L
Decimal: 12
Hexadecimal: 0C
Prints any data in the print buffer and advances the paper to the next top
of form. A carriage return is performed after the form feed.
This control code cancels control code SO.
To Next Page
Loading...
